8.5. 如何设置 Technisat/B2C2 Flexcop 设备¶
注意
此文档已过时。
作者:Uwe Bugla <uwe.bugla@gmx.de> 2009 年 8 月
8.5.1. 找出您拥有的设备¶
重要提示:该驱动程序不支持 Technisat USB 2 设备!
首先使用随附的内核启动您的 Linux 盒子
lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
Technisat SkyStar2 DVB card (rev 02)
dmesg | grep frontend may show you for example:
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
8.5.2. 内核编译:¶
如果 Flexcop / Technisat 是您盒子中唯一的 DVB / TV / Radio 设备,请移除不必要的模块并检查此项
Multimedia support
=> Customise analog and hybrid tuner modules to build
在该目录中,取消勾选所有已激活的驱动程序(仅限 ATSC 第三代,Simple tuner support
除外 -> 请参见情况 9)。
然后请激活
主模块部分
Multimedia support
=>DVB/ATSC adapters
=>Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters
=>
Technisat/B2C2 Air/Sky/Cable2PC PCI
(PCI 卡) 或=>
Technisat/B2C2 Air/Sky/Cable2PC USB
(USB 1.1 适配器),以及用于故障排除=>
Enable debug for the B2C2 FlexCop drivers
前端 / 调谐器 / 解调器模块部分
Multimedia support
=>DVB/ATSC adapters
=>
Customise the frontend modules to build
Customise DVB frontends
=>
SkyStar DVB-S 版本 2.3
=>
Zarlink VP310/MT312/ZL10313 based
=>
Generic I2C PLL based tuners
SkyStar DVB-S 版本 2.6
=>
ST STV0299 based
=>
Generic I2C PLL based tuners
SkyStar DVB-S 版本 2.7
=>
Samsung S5H1420 based
=>
Integrant ITD1000 Zero IF tuner for DVB-S/DSS
=>
ISL6421 SEC controller
SkyStar DVB-S 版本 2.8
=>
Conexant CX24123 based
=>
Conexant CX24113/CX24128 tuner for DVB-S/DSS
=>
ISL6421 SEC controller
AirStar DVB-T 卡
=>
Zarlink MT352 based
=>
Generic I2C PLL based tuners
CableStar DVB-C 卡
=>
ST STV0297 based
=>
Generic I2C PLL based tuners
AirStar ATSC 卡第一代
=>
Broadcom BCM3510
AirStar ATSC 卡第二代
=>
NxtWave Communications NXT2002/NXT2004 based
=>
Generic I2C PLL based tuners
AirStar ATSC 卡第三代
=>
LG Electronics LGDT3302/LGDT3303 based
Multimedia support
=>Customise analog and hybrid tuner modules to build
=>Simple tuner support